Industrial Technology Management specializes in vibration, noise, and seismic isolation; insulated steam injection tubing, oil field steam generators; custom padding and jackets, neoprene bearing pads and bridge bearings; Fabreeka, Polymer Technologies, Seismic Shock Control, Noise Suppression Technologies, Struthers Thermo-Flood
About ITM
Who We Represent
Our Territory
Our Products
  Noise, Vibration
Thermal & Seismic
Base Isolation
Products
   
  Vacuum Insulated Tubing for
Thermal Enhanced Oil Recovery
   
  Oil Field Steam
Generators
   
  Gideon Ultra Low Nitrous Oxide Burner
   
  High Temperature Insulated Fabric Blankets and Bellows
   
  Neoprene Bearing Pads and Bridge Bearings
   
  Technical Papers
   
Contact ITM
Links

GIDEON ULTRA LOW NOX BURNER -
Download PDF

 
  • Single Digit NOx and CO
  • High Turndown Ratio
  • Rapid Adjustment to Load
  • Cost Effective

The Gideon Ultra Low NOx Burner is the answer to compliance with emission standards for operators of all boilers. The Burner is a precision made Low NOx Burner designed to meet the most stringent NOx emission requirements. The design and operation of the burner is protected by 18 worldwide patents. Field tests of the burner have demonstrated that the burner can achieve less than 6 ppm NO (d, 3% O²) without the use of catalyst, reburning or ammonia or urea injection.

New Installations and retrofit Applications

The burner can be installed on any new boiler or retrofitted to any existing boiler which uses a forced draft fan. The versatility of the burner is achieved by its simple design and custom manufacture of the connections to the boiler. The burner has been installed on firetube boilers which have swing doors and watertube boilers without restricting access to the boiler. The custom fit of the burner to the boiler will maintain the original boiler design, allow access to the boiler and minimize the installation cost of the burner.

Maintenance

The Gideon Ultra Low NO Burner is designed for the convenience of the operators of industrial and utility boilers. There are no moving parts in this burner. This simple design reduces maintenance to a minimum.

Performance

The Gideon Ultra Low NO Burner operates with the lowest emissions and the highest performance of available burners. The burner has the following performance characteristics.

  1. Excess Oxygen <1%
  2. NO emissions <6 ppm (d,3% OČ)
  3. CO emissions <10 ppm (d,3% OČ)
  4. Compact stable blue flame
  5. Turn down ratio, greater than 10 to 1
  6. No moving parts

Features

The burner achieves its outstanding performance by a patented swirl design which produces short, strongly stable flames when using flue gas recirculation, FGR. FGR is provided to the burner through the air fan. FGR is regulated by a damper controlled off the steam demand which is modulated to maintain the optimum ratios of fuel, air and flue gas. The air, FGR and fuel are linked proportionally to maintain proper combustion and the desired levels of OČ, NOx, and CO. The burner is fully modulated and has been demonstrated to operate over a turn down ratio of greater than 10:1. (Gas)